ONE CONCEPT MULTIPLE APPLICATIONS
Recoil is a problem that exists in every shooting platform, though it is more pronounced in larger caliber firearms. It’s that kick of energy you feel after pulling the trigger that causes your muzzle to lift, resulting in loss of sight control, decreased target acquisition, and poor follow-up shots. Even worse, you can still feel the effects of recoil even after you finish shooting, as it can result in shoulder pain and injuries.
You shouldn’t have to shoulder the effects of heavy recoil at the expense of your precision or safety. That’s where Pauldron comes in. Pauldron Recoil Reduction System is an innovative system that is capable of decreasing firearm recoil by up to 85%. With Pauldron, rather than focusing on that next recoil kick, you can focus on your next shot.
Select the tabs that correlate with your firearm to see which type of Pauldron Recoil Reduction System is the best fit for you.
*Please note that we are in the process of developing a universal-fit Pauldron, so even if you do not see your firearm listed below, it will likely be compatible with Pauldron in the future.
| Length | Middle Width | Bottom Width |
|---|---|---|
|
5.4 in |
0.78 in
|
1.07 in |
| Weight |
|---|
|
4.0 oz |
| Length | Middle Width | Bottom Width |
|---|---|---|
|
3.4 in |
0.78 in
|
1.07 in |
| Weight |
|---|
|
2.6 oz |
| Length | Middle Width | Bottom Width |
|---|---|---|
|
2.5 in |
0.78 in
|
1.07 in |
| Weight |
|---|
|
1.9 oz |
If you own a rifle, the Pauldron best suited for you is one of our Pauldron Stock Kits. Our stock kits can be assimilated with your rifle just as they are, or they can be customized beforehand to ensure a perfect fit. If you purchase a Wooden Stock Kit, some firearm tooling and customization may be required.
The following plastic stock rifles are compatible with Pauldron Stock Inserts. If you do not see your rifle, please note that we can still customize either your rifle or the Pauldron to ensure a perfect fit.
| Make | Model | Caliber *Note: other calibers available upon request |
|---|---|---|
|
Remington 700 |
ADL/BDL |
308 WM, 300 WM, 338 RUM |
|
Tika |
T3 |
308 WM |
|
Weatherby |
Vanguard V |
270 WSM, 340 Weatherby WM |
|
Browning |
A-Bolt |
270 STW "Shooting Times Western" |
|
Winchester |
Model 70 |
338 WM |
|
Ruger |
M77 MKI, MKII |
30-06, 300 WM |
|
Ruger |
American |
458 SOCOM |
The following wooden stock rifles are compatible with Pauldron Stock inserts. Please note that as a wooden firearm, your rifle’s butt may require customization so that the Pauldron Stock Insert can be inserted.
| Make | Model | Caliber |
|---|---|---|
|
Remington 700 |
CDL |
7mm Rem MAG |
|
Browning |
A-Bolt |
300 WSM |
|
Savage |
112 |
338 Lapua |
For your firearm to be compatible with Pauldron, either the Pauldron you receive or your firearm may have to be customized. When you purchase a Pauldron, you will be required to submit a detailed report of your firearm so that we can determine the best option for you.
If you own a shotgun, the Pauldron best suited for you is one of our Pauldron Stock Inserts. In some cases, either the Pauldron you receive or the shotgun itself may require customization in order to achieve a secure fit.
| Make | Model | Gauge |
|---|---|---|
|
Mossberg |
870, 590M |
12 |
|
Various Skeet and Trap Shotguns |
|
12 |
|
Benelli |
|
12 |
| Additional Parts |
|---|
|
M4 Tactical Shotgun Adapter |
|
Graco Adjustable Butt Plate System |
As we are currently in the process of developing a universal-fit Pauldron Recoil Reduction System, there may be some types of firearms that are not yet compatible with Pauldron right out of the box. If this is the case for your firearm, please note that we can still customize either the Pauldron or the firearm itself so that your firearm will be Pauldron compatible.
When you make a purchase, you will be required to fill out a form regarding details about your firearm. This will allow us to take the proper steps in developing a recoil reduction system taylored just for you.
| Length | Middle Width | Bottom Width |
|---|---|---|
|
5.4 in |
0.78 in
|
1.07 in |
| Weight |
|---|
|
4.0 oz |
| Length | Middle Width | Bottom Width |
|---|---|---|
|
3.4 in |
0.78 in
|
1.07 in |
| Weight |
|---|
|
2.6 oz |
| Length | Middle Width | Bottom Width |
|---|---|---|
|
2.5 in |
0.78 in
|
1.07 in |
| Weight |
|---|
|
1.9 oz |
If you own a rifle, the Pauldron best suited for you is one of our Pauldron Stock Kits. Our stock kits can be assimilated with your rifle just as they are, or they can be customized beforehand to ensure a perfect fit. If you purchase a Wooden Stock Kit, some firearm tooling and customization may be required.
The following plastic stock rifles are compatible with Pauldron Stock Inserts. If you do not see your rifle, please note that we can still customize either your rifle or the Pauldron to ensure a perfect fit.
| Make | Model | Caliber *Note: other calibers available upon request |
|---|---|---|
|
Remington 700 |
ADL/BDL |
308 WM, 300 WM, 338 RUM |
|
Tika |
T3 |
308 WM |
|
Weatherby |
Vanguard V |
270 WSM, 340 Weatherby WM |
|
Browning |
A-Bolt |
270 STW "Shooting Times Western" |
|
Winchester |
Model 70 |
338 WM |
|
Ruger |
M77 MKI, MKII |
30-06, 300 WM |
|
Ruger |
American |
458 SOCOM |
The following wooden stock rifles are compatible with Pauldron Stock inserts. Please note that as a wooden firearm, your rifle’s butt may require customization so that the Pauldron Stock Insert can be inserted.
| Make | Model | Caliber |
|---|---|---|
|
Remington 700 |
CDL |
7mm Rem MAG |
|
Browning |
A-Bolt |
300 WSM |
|
Savage |
112 |
338 Lapua |
For your firearm to be compatible with Pauldron, either the Pauldron you receive or your firearm may have to be customized. When you purchase a Pauldron, you will be required to submit a detailed report of your firearm so that we can determine the best option for you.
If you own a shotgun, the Pauldron best suited for you is one of our Pauldron Stock Inserts. In some cases, either the Pauldron you receive or the shotgun itself may require customization in order to achieve a secure fit.
| Make | Model | Gauge |
|---|---|---|
|
Mossberg |
870, 590M |
12 |
|
Various Skeet and Trap Shotguns |
|
12 |
|
Benelli |
|
12 |
| Additional Parts |
|---|
|
M4 Tactical Shotgun Adapter |
|
Graco Adjustable Butt Plate System |
As we are currently in the process of developing a universal-fit Pauldron Recoil Reduction System, there may be some types of firearms that are not yet compatible with Pauldron right out of the box. If this is the case for your firearm, please note that we can still customize either the Pauldron or the firearm itself so that your firearm will be Pauldron compatible.
When you make a purchase, you will be required to fill out a form regarding details about your firearm. This will allow us to take the proper steps in developing a recoil reduction system taylored just for you.
Pre-assembled spring stack
Tested on .270 and higher caliber firearms and .223/5.56 NATO
Fits standard buffer tubes
Rifle, Carbine, and “Shorty” lengths
Up to 85% recoil reduction
Increased shoulder comfort
Improved accuracy
Pre-assembled spring stack
Drop in replacement for hollow stocks
Tested on .270 and higher caliber firearms
Up to 85% recoil reduction
Improved shoulder comfort
Improved accuracy
Pre-assembled spring stack
Designed for wooden stock rifles
Tested on .300 and higher caliber firearms
Up to 85% recoil reduction
Increased shoulder comfort
Improved accuracy
Stay up to date with the latest news and advancements on the Pauldron Recoil Reduction System (PRRS)! We have several models in development being engineered to optimize recoil reduction for bolt action stock inserts and shotguns. You don’t want to miss out!
LET PAULDRON SHOULDER THE RECOIL SHOCK
Pauldron Recoil Reduction Technology supports shooters by utilizing innovative recoil reducing springs to actively dissipate both primary and secondary recoil, offering shooters a powerful modern solution for their recoil protection needs.
Stay up to date with the latest news and advancements on the Pauldron Recoil Reduction System (PRRS)! We have several models in development being engineered to optimize recoil reduction for bolt action stock inserts and shotguns. You don’t want to miss out!
© 2021 Pauldron RRS | Website by Xpedition Marketing
